Commercial Overhead

Ribbed Steel/3285 Polystyrene Sandwich Door/ 3212 Thermally-Broken Insulated Steel Sandwich Door

Aluminum Full View Door/Commercial Overhead Door Openers

taylor door steel doors, commercial ribbed steelRibbed Steel

3250 25 Gauge, Uninsulated
3251 25 Gauge, Insulated w/ Vinyl Back
3252 25 Gauge, Insulated w/ Steel Back
3240 24 Gauge, Uninsulated
3241 24 Gauge, Insulated w/ Vinyl Back
3242 24 Gauge, Insulated w/ Steel Back
3220 20 Gauge, Uninsulated
3221 20 Gauge, Insulated w/ Vinyl Back
3222 20 Gauge, Insulated w/ Steel Back

- Insulated Door R-Value: 6.81*
- 2” thick sections constructed of pre-finished galvanized steel
- Insulated models feature either heavy duty vinyl or 27 gauge steel backers
- 3250/51/52 doors utilize steel that meets the nominal 24 ga. designation used by some door manufacturers
- Box shaped stiles are riveted to the face of the section and are galvanized for additional corrosion protection
- Tongue and groove meeting rails provide superior rail strength and weather resistance
- Glass is available in 1/8″ DSB, 1/8″ Lexan, Insulated or 1/4″ tempered glass
- Glass is easily replaced or substituted by removing molded frames
- Exhaust port is optional for bottom section
- Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements
- Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers
- Bottom U-shaped astragal in an aluminum retainer is standard
- Increased windload requirements may be specified
- All models are available in finishing coat of white. Additional sandstone, brown and silver finishes are available in models 3240/41/42 ONLY
*Calculated in accordance with ASHRAE standard formulas

commercial polystyrene doors, taylor door3285 Polystyrene Sandwich Doors

Model 3285 Polystyrene Sandwich Door
- R-Value: 8.72*
- 26 gauge face and 27 gauge back steel are mechanically locked and bonded to a polystyrene core with urethane adhesive for maximum structural integrity
- Tongue and groove meeting rails provide superior joint strength and weather resistance
- Concealed hinge attachment plates run the full height of sections for superior strength
- Rigid exterior end stiles are finish painted white
- Glass is available in 1/8” float, 7/16” insulated or 1/4” tempered glass
- Glass is easily replaced or substituted by removing molded frames
- Exhaust port is optional for bottom section
- Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.
- Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers
- Bottom U-shaped astragal is standard
- Increased windload requirements may be specified
- Available in finish coat colors of white, sandstone or brown
*Calculated in accordance with ASHRAE standard formulas

taylor door thermally-broken steel doors, commercial doors3212 Thermally-Broken Insulated Steel Sandwich Door

- Model 3212 Thermally-Broken Insulated Steel Sandwich Door
- R-Value: 14.3*
- Foamed-in-place polyurethane core permanently bonds the 20-gauge exterior and 27-gauge interior steel skins to form a rigid homogeneous section
- 2” thick sections are thermally broken to eliminate convection
- Tongue and groove meeting rails with joint gasketing provide superior joint strength and prevent air infiltration
- Concealed hinge attachment plates run the full height of sections for superior strength
- Rigid exterior end stiles are finish painted white
- Glass is available in 7/16” insulated or 1/4” tempered glass
- Glass is easily replaced or substituted by removing molded frames
- Exhaust port is optional for bottom section
- Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom – design requirements.
- Heavy duty hardware may be specified with 11 or 14-gauge hinges and 10 ball rollers
- Bottom U-shaped astragal is standard
- Increased windload requirements may be specified
- Available in finish coat color of white
*Calculated in accordance with ASHRAE standard formulas

taylor door aluminum full view doors, commercial doors3290 Aluminum Full View Doors

Model 3290 Aluminum Full View Doors
- Clear anodized or white extruded aluminum construction
- Wide top rails, bottom rails and end stiles create additional perimeter strength
- Hidden through-bolt assembly insures maximum structural integrity
- Tongue and groove meeting rails provide superior joint strength and weather resistance
- Aluminum panels may be specified to create solid sections
- Glass is available in 1/8” float, 7/16” insulated or 1/4” tempered glass
- Glass is easily replaced or substituted by removing an inside vinyl strip
- Exhaust ports are optional for bottom section
- Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.
- Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers
- Bottom U-shaped astragal is standard

Commercial Overhead Door Openers

 

 commercial lifts, taylor door lift medium duty taylor door lifts, commercial standard duty lift  commercial doors, taylor door sliding standard duty
Standard Lift Sectional Medium Duty Standard Lift Sectional Standard Duty Sliding Doors Standard Duty
commercial doors, taylor door standard lift heavy duty  commercial doors, taylor door sliding doors  commercial doors, taylor door standard lift heavy duty
Standard Lift Sectional Heavy Duty Sliding Doors Heavy Duty Standard Lift Sectional Heavy Duty
commercial doors, taylor door standard lift sectional heavy duty doors
Standard Lift Sectional Heavy Duty